BMP 701645-10 – Screw In Freeze Plug kit, All BMP Steel Blocks 10PK
Screw in freeze plug kit for Bill Mitchell Products BMP Aluminum blocks. 10 Screw in freeze plugs and o-rings 1 5/16″-12UNF
Brand: Bill Mitchell Products (BMP)
BMP 702210-16 – Valve Springs 1.550″ OD, Dual spring with Damper, 200lbs @ 1.900″, 580lbs @ 1.200″,.700″ max lift
BMP 702210-16 – Valve Springs 1.550″ OD, Dual spring with Damper, 200lbs @ 1.900″, 580lbs @ 1.200″,.700″ max lift Specifications: Dual valve springs with damper O.D.: 1.550 inch, I.D.: 1.140 inch, Inner Spring I.D.: .738 inch Seat pressure: 200 lbs. @ 1.900 inch, Open Pressure: 580 lbs. @ 1.200 inch Coil Bind: 1.100 inch =
Bill Mitchell Products 702355-8 – Chevy Big Block Guide Plates 3/8″ (BMP Aluminum Heads)
BMP BBC Guide Plates 3/8″ (BMP Aluminum Heads) 702355-8 For proper alignment of the rocker arms over the center of the valve. These Guide Plates can eliminate push rod to cylinder head interference. Heat treated & plated steel. Designed specifically for the BMP Aluminum Big Block heads.
Bill Mitchell Products BMP 023015C – Cylinder Head Aluminum Ford Small Block 310cc 64cc 10Degree 2.250″ x 1.625″ CNC PORTED (DISCONTINUED)
BILL MITCHELL PRODUCTS BMP Cylinder Head Aluminum Ford Small Block 310cc 10Degree 2.250″ x 1.625″ The BMP engineering team has developed what is the ultimate competition cylinder head for 302/351 Ford small block applications. It features a highly advantageous 10° valve angle (with parallel rocker arm mounting) and some humongous ports. The “as-cast” intake runners are
Bill Mitchell Products BMP 087582 – Aluminum Engine Block Ford Small Block 351 Mains, 9.500 Deck, 4.115 Bore, Billet Caps
Bill Mitchell Products SBF 357T6 Aluminum Engine Block Ford Small Block 351 Mains, 9.500″Deck, 4.115″ Bore. Standard Cam(includes, Screw in Freeze plugs, Cam plug, All dowel pins and Pipe plugs) 087582 Block Specifications: Block Applications: The BMP aluminum blocks are designed to be a replacement for the Small Block Ford one piece rear seal applications
Bill Mitchell Products 702455 – Chevy Big Block Stud Girdle (BMP Aluminum Cylinder Heads)
These CNC-machined stud girdles help control valve lift and timing changes due to stud flex, allowing for more consistent high-rpm performance. Each stud girdle is anodized and comes with high-quality hardened adjusting nuts. Tall-style valve covers are required. Keep your valvetrain located properly and stabilized with these lightweight aluminum, CNC machined stud girdles, ensuring you
Bill Mitchell Products BMP 023015 – Cylinder Head Aluminum Ford Small Block 285cc 64cc 10Degree 2.250″ x 1.625″(DISCONTINUED)
BILL MITCHELL PRODUCTS BMP Cylinder Head Aluminum Ford Small Block 285cc 10Degree 2.250″ x 1.625″ The BMP engineering team has developed what is the ultimate competition cylinder head for 302/351 Ford small block applications. It features a highly advantageous 10° valve angle (with parallel rocker arm mounting) and some humongous ports. The “as-cast” intake runners
Bill Mitchell Products BMP 023005 – Cylinder Head Aluminum Ford Small Block 200cc 64cc 18Degree 2.020″ x 1.600″(DISCONTINUED)
BILL MITCHELL PRODUCTS BMP Cylinder Head Aluminum Ford Small Block 200cc 18Degree 2.020″ x 1.600″ Designed to provide serious horsepower for street/strip applications, the 18° BMP SBF Aluminum Head has excellent flow characteristics in its “as cast” form. You have a choice of 200 or 225cc intake runners to provide the optimum balance of flow
Bill Mitchell Products BMP 088510 – Aluminum Engine Block Hemi Block 10.720 Deck, 4.240 Bore, Billet Caps
Bill Mitchell Products 426 Hemi 357T6 Aluminum Engine Block 426 Hemi Block, 10.720″Deck, 4.250″ Rough Bore. Standard Cam,.904″ Lifters (includes, Screw in Freeze plugs, Cam plug, All dowel pins and Pipe plugs) 088510 Block Applications: The BMP Aluminum 426H/440W blocks are designed to be a replacement for all RB block applications from Stock to all
Valve Stem Seals Viton, Metal clad press on 5/16
Valve Stem Seals Viton, Metal clad press on 5/16. Set of 16 Viton® valve stem seals are designed to keep oil out of the combustion chamber. They are manufactured from special Viton® material for maximum control and durability throughout the entire rpm range. The seals feature a special smaller design to allow for clearance in
Valve Locks 10 degree 11/32 Machined steel -.050 installed height
Valve Locks 10 degree Machined steel -.050 installed height. Set of 32pcs Valve locks are wider-angled 10 degree locks. They distribute the ever-increasing valve spring loads over the retainer better than typical 7 degree locks by reducing the chance of “pull-through” failure. They are precision-machined for accuracy and are recommended for all race applications due
Valve Locks 10 degree 11/32 Machined steel standard installed height
Valve Locks 10 degree Machined steel standard installed height. Set of 32pcs Valve locks are wider-angled 10 degree locks. They distribute the ever-increasing valve spring loads over the retainer better than typical 7 degree locks by reducing the chance of “pull-through” failure. They are precision-machined for accuracy and are recommended for all race applications due