Bill Michell Products Rocker Arm Studs
Set of 8 BMP Rocker Arm Studs to keep your Rocker Arms Secured.
Brand: Bill Mitchell Products (BMP)
Bill Mitchell Products 702351-8 – Chevy Small Block Guide Plates 5/16″ Flat (BMP Aluminum Heads)
BMP SBC Guide Plates offset 5/16″ (BMP Aluminum Heads) 702351-8 For proper alignment of the rocker arms over the center of the valve. These Guide Plates can eliminate push rod to cylinder head interference. Heat treated & plated steel. Designed specifically for the BMP Aluminum small block heads.
Bill Mitchell Products 702353-8 – Ford Small Block Guide Plates 5/16″ Flat (BMP Aluminum Heads)
BMP SBF Guide Plates offset 5/16″ (BMP Aluminum Heads) 702353-8 For proper alignment of the rocker arms over the center of the valve. These Guide Plates can eliminate push rod to cylinder head interference. Heat treated & plated steel. Designed specifically for the BMP Aluminum small block Ford heads.
Bill Mitchell Products 702355-8 – Chevy Big Block Guide Plates 3/8″ (BMP Aluminum Heads)
BMP BBC Guide Plates 3/8″ (BMP Aluminum Heads) 702355-8 For proper alignment of the rocker arms over the center of the valve. These Guide Plates can eliminate push rod to cylinder head interference. Heat treated & plated steel. Designed specifically for the BMP Aluminum Big Block heads.
Bill Mitchell Products 702452 – Chevy Small Block Stud Girdle (BMP Aluminum Cylinder Heads)
These CNC-machined stud girdles help control valve lift and timing changes due to stud flex, allowing for more consistent high-rpm performance. Each stud girdle is anodized and comes with high-quality hardened adjusting nuts. Tall-style valve covers are required. Keep your valvetrain located properly and stabilized with these lightweight aluminum, CNC machined stud girdles, ensuring you
Bill Mitchell Products 702454 – Ford Small Block Stud Girdle (BMP Aluminum Cylinder Heads)
These CNC-machined stud girdles help control valve lift and timing changes due to stud flex, allowing for more consistent high-rpm performance. Each stud girdle is anodized and comes with high-quality hardened adjusting nuts. Tall-style valve covers are required. Keep your valvetrain located properly and stabilized with these lightweight aluminum, CNC machined stud girdles, ensuring you
Bill Mitchell Products 702455 – Chevy Big Block Stud Girdle (BMP Aluminum Cylinder Heads)
These CNC-machined stud girdles help control valve lift and timing changes due to stud flex, allowing for more consistent high-rpm performance. Each stud girdle is anodized and comes with high-quality hardened adjusting nuts. Tall-style valve covers are required. Keep your valvetrain located properly and stabilized with these lightweight aluminum, CNC machined stud girdles, ensuring you
Bill Mitchell Products BMP – Aluminum Block Cylinder Sleeves BMP/World Blocks
Engine Block Sleeves to rebuild & restore your BMP and old World Products aluminum Block. Please specify length & O.D. in the Order Instructions/Comments when ordering, so we can be sure to get you the correct sleeve.
Bill Mitchell Products BMP 020650 – Cylinder Head Aluminum Chevy Big Block 310cc 119cc 24Degree 2.300″ x 1.880″
BILL MITCHELL PRODUCTS BMP Cylinder Head aluminum Chevy Big Block 310cc 24Degree 2.300″ x 1.880″ (Currently not in production) This highly evolved, race-proven cylinder head is capable of supporting in excess of 800 horsepower in “as cast” form. Formally known as the Merlin III, BMP BBC aluminum Head are available with 310cc or 350cc
Bill Mitchell Products BMP 020650C – Cylinder Head Aluminum Chevy Big Block 345cc 119cc 24Degree 2.300″ x 1.880″ CNC PORTED
BILL MITCHELL PRODUCTS BMP Cylinder Head aluminum Chevy Big Block 345cc 24Degree 2.300″ x 1.880″ This highly evolved, race-proven cylinder head is capable of supporting in excess of 800 horsepower in “as cast” form. Formally known as the Merlin III, BMP BBC aluminum Head are available with 310cc or 350cc intake runners. The BMP BBC
Bill Mitchell Products BMP 020660 – Cylinder Head Aluminum Chevy Big Block 350cc 119cc 24Degree 2.300″ x 1.880″
BILL MITCHELL PRODUCTS BMP Cylinder Head Aluminum Chevy Big Block 350cc 24Degree 2.300″ x 1.880″ (Currently not in Production) This highly evolved, race-proven cylinder head is capable of supporting in excess of 800 horsepower in “as cast” form. Formally known as the Merlin III, BMP BBC aluminum Head are available with 310cc or 350cc intake
Bill Mitchell Products BMP 020660C – Cylinder Head Aluminum Chevy Big Block 375cc 119cc 24Degree 2.300″ x 1.880″ CNC PORTED
BILL MITCHELL PRODUCTS BMP Cylinder Head Aluminum Chevy Big Block 350cc 24Degree 2.300″ x 1.880″ (Currently not in production) This highly evolved, race-proven cylinder head is capable of supporting in excess of 800 horsepower in “as cast” form. Formally known as the Merlin III, BMP BBC aluminum Head are available with 310cc or 350cc intake