Single valve springs with damper
O.D.: 1.250 inch, I.D.: .880 inch
Seat pressure: 125 lbs. @ 1.810 inch,
Open Pressure: 335 lbs. @ 1.250 inch
Coil Bind: 1.160 inch, .650 inch lift
Max recommended lift: .600 inch
Good for Hydraulic Flat tappet cams. Used internally on all -1 Small Block Head Assemblies
Have been using these springs for 20 plus years. Excellent success rate with these. Have used these springs on All World Products and Bill Mitchell Products BMP cylinder heads for 20 plus years. As the old saying goes “if isn’t broken then don’t fix it”. Of course we recommend that you check your valve spring rates periodically to make sure they are in good health.